Mounting clip for mounting front window including accessories

Description

This lasered acrylic (Plexiglas) clip or toggle can be used to attach a front window to the existing frame.

If you are going to use the mounting clips in combination with glass tape, you can indicate this (in the comments field in the shopping cart/order). We will then supply an extra spacer that prevents the clip from skewing due to the height of the plate + glass tape. This lasered acrylic (plexiglass) clip or toggle can be used to attach a front window to the existing frame. Using these clips makes fitting a plastic front window an easy job.

Using these clips has a number of advantages:

• The plastic front window has room to either expand or contract. This prevents cracks and cracking. 
• The front window is not weakened by the drilled fixing holes.
• The plastic front window is easy to remove so you kut clean the glass or the front window. 

For sufficient attachment points, we recommend placing a clip on each side approx. 5cm from the edge. The maximum distance between 2 clips is 30cm. For example: the plastic front window is 60cm wide. Then place 2 clips at 5cm from the edge and 1 in the middle of the panel at the bottom and top.

CAUTION: these clips have foil on both sides against damage during transport and storage. This foil should be removed for best results.